Ozone in the Laundry Industry—Practical Experiences in the United Kingdom

Since the early 1990s, the use of ozone in many commercial and industrial laundering applications has been evolving rapidly. Ozone allows washing to be conducted using cold water, thereby saving considerable heat energy and water consumption. Additionally, ozone enhances the wash process, resulting in a significant reduction in detergent dosage and number of rinses, thus saving water. Ozone/cold water cycles are gentler to fabrics, thus extending linen life. Finally, ozone/cold water laundering is beneficial for effluents, resulting in reductions in COD (chemical oxygen demand). Microorganisms are destroyed effectively in ozone-wash waters, and washing and drying cycles are shorter, thus saving labor. In this paper, the authors describe some specific case studies at commercial laundering installations in the UK, whereby the users of ozone have reaped major benefits, including enhanced microorganism kills/inactivation and significant cost savings.     

Fabrication of suspended carbon microstructures by e-beam writer and pyrolysis

A fabrication process has been developed to create suspended carbon microelectromechanical system (C-MEMS) structures. SU-8, a negative photoresist, was used as the starting material and was converted to the desired carbon microstructures using pyrolysis in an inert atmosphere. Suspended carbon-micro and nano electromechanical system (C-MEMS/NEMS) structures with feature sizes down to 500 nm were fabricated by ultra violet/electron beam (EB) lithography and pyrolysis. The problem of charging of the non-conductive SU-8 surface was solved by partially masking a thin metal layer to prevent the repulsion of negative charged electrons before EB writing. Complex suspended C-MEMS structures, such as bridges and networks have been formed. This fabrication method can accurately and reproducibly produce various suspended C-MEMS structures which have applications in microelectronics and biosensing.     

Kinetic studies of the pyrolysis of sewage sludge by tga and comparison with fluidized beds

The pyrolysis of sewage sludge was examined by thermogravimetric analysis using different heating rates, particle sizes and final temperatures. A semi-empirical model was developed with four global consecutive/competitive reactions to volatile and solid products including also a heat balance. This model was extrapolated to isothermal reactor conditions and compared to experimental data on fluidized bed pyrolysis. Depending on the particle size and reactor temperature, about 90% of the maximum conversion in a fluidized bed takes place under external heat transfer control, the rest under kinetic control. Incomplete conversion occurs at short particle residence times, which were calculated approximately by the model.     

QUANTITATIVE MEASUREMENT OF CHROMIUM'S ABILITY TO PROMOTE ADHESION

Using atomic force spectroscopy, we investigated the adhesion-promoting ability of chromium. An intermediate layer of chromium can overcome the low adhesion between metal films and silicon dioxide. For the first time, we quantitatively studied this experimentally well known fact. We compared the adhesion between chromium and different substrates such as gold, silver, mica, and silicon dioxide and, beyond that, the adhesion between silicon dioxide and the same substrates. To avoid additional effects due to water, we chose ethanol as a nonpolar solvent. Taking the interfacial energies of the surfaces with the liquid into account eliminates the direct influence of the fluid medium on the adhesion of the solid material. The results we obtained corroborate the experimental fact of higher adhesion of chromium with the chosen substrates, as well as substantiate the value of chromium as an adhesion promoter. The adhesion of chromium-coated probes on gold, silicon dioxide, and mica is higher than the adhesion of silicon dioxide probes on the same substrates.     

Foam processing of poly(ethylene-co-vinyl acetate) rubber using supercritical carbon dioxide

Soft rubber foams like poly(ethylene-co-vinyl acetate) (EVA) are industrially applied in a broad range of products, including sports gear, insulation materials and drug delivery systems. In contrast to glassy polymers, few studies in literature concern the foaming of soft rubbers using supercritical carbon dioxide. In this study, open microporous matrices of EVA have been formed with CO₂. Prior to the foam expansion, sorption and swelling isotherms of CO₂ in EVA have been measured and the obtained isotherms have been correlated using the Sanchez-Lacombe equation of state. Additionally, a pressure-independent diffusion coefficient of CO₂ in EVA has been obtained from these experiments. The microporous foams have been formed by a pressure quench of the CO₂-swollen polymer matrix. Sorption pressure as well as temperature and decompression times appear to determine the pore size and bulk density of the foam. These parameters allow for a control of the foam structure of EVA rubbers.     

Adsorption of mercaptopropionic acid onto Au(1 1 1): Part II. Effect on copper electrodeposition

Copper deposition in the presence of an organic additive (3-mercaptopropionic acid, MPA) was studied by cyclic voltammetry and in situ scanning tunneling microscopy (STM) and the results are compared to those for additive-free solutions. It is shown that underpotential deposition (upd) of copper onto a fully MPA-covered electrode produces a defect-rich substrate, but the defects are blocked by the dense organic film for bulk deposition, resulting in a low number of nuclei. A grain-refining effect of MPA, however, was found, when Cu deposition was initiated shortly after addition of MPA to the solution, i.e., for a low-coverage MPA adlayer.     

The dynamic contact area of elastomers at different velocities

The friction in tribo-systems that contain viscoelastic materials, such as elastomers, is relevant for a large number of applications. Examples include tyres, hoses, transmission and conveyor belts. To quantify the friction in these applications, one must first understand the contact behaviour of such viscoelastic materials, both in static and in dynamic situations. This work discusses an experimental study into the change of the contact area with the sliding velocity and relates the change in contact area with the mechanical properties of the elastomer. The results show that for a tribo-system containing an elastomer, there is a threshold velocity, above which the size of the contact area significantly reduces.     

Task-dependent evolution of modularity in neural networks

There exist many ideas and assumptions about the development and meaning of modularity in biological and technical neural systems. We empirically study the evolution of connectionist models in the context of modular problems. For this purpose, we define quantitative measures for the degree of modularity and monitor them during evolutionary processes under different constraints. It turns out that the modularity of the problem is reflected by the architecture of adapted systems, although learning can counterbalance some imperfection of the architecture. The demand for fast learning systems increases the selective pressure towards modularity.     

Perfect Laplacians for Polygon Meshes

A discrete Laplace‐Beltrami operator is called perfect if it possesses all the important properties of its smooth counterpart. It is known which triangle meshes admit perfect Laplace operators and how to fix any other mesh by changing the combinatorics. We extend the characterization of meshes that admit perfect Laplacians to general polygon meshes. More importantly, we provide an algorithm that computes a perfect Laplace operator for any polygon mesh without changing the combinatorics, although, possibly changing the embedding. We evaluate this algorithm and demonstrate it at applications.     

Think,feel, bid: the impact of environmental conditions on the role of bidders’ cognitive and affective processes in auction bidding

Environmental conditions and the interplay of cognitive and affective processes both exert influences on bidding behavior. This paper brings the above together, considering how the (external) auction environment determines the impact of (internal) cognitive and affective processes on bidding behavior, assessed in comparison to the optimal bid. Two aspects of the auction environment were considered, namely auction dynamics (low: first-price sealed-bid auction, high: Dutch auction) and value uncertainty (low, high). In a laboratory experiment, we assess bidders’ cognitive workload and emotional arousal through physiological measurements. We find that higher auction dynamics increase the impact of emotional arousal on bid deviations, but not that of cognitive workload. Higher value uncertainty, conversely, increases the impact of cognitive workload on bid deviations, but not that of emotional arousal. Taken together, the auction environment is a critical factor in understanding the nature of the underlying decision process and its impact on bids.